How are armatures made?

Last Update: May 27, 2022

This is a question our experts keep getting from time to time. Now, we have got the complete detailed explanation and answer for everyone, who is interested!

Asked by: Miss Linnea Kozey DDS
Score: 5/5 (16 votes)

The core of the armature is made up of laminated thin metal plates instead of a single piece. The thickness of laminations depends on the supply frequency. It is approximately 0.5mm thick. The laminated silicon steel is used for the armature core to reduce the eddy current and hysteresis loss.

What are the components of an armature?

Armature is the rotating part of a DC electrical machine and one of the principal components of the DC machine's electromagnetic system. Armatures are comprised of four major parts: steel shaft, steel laminated core, copper windings, and copper-segment commutator.

What is a suitable material for an armature?

Armature, in sculpture, a skeleton or framework used by an artist to support a figure being modeled in soft plastic material. An armature can be made from any material that is damp-resistant and rigid enough to hold such plastic materials as moist clay and plaster, which are applied to and shaped around it.

What are the two main components of the armature?

An armature is made up of a number of main components; the core, the commutator, the winding and the shaft.
  • About the core. The core of an armature is made up of lots of thin metal plates called laminations, which are usually about 0.5mm thick. ...
  • About the commutator. ...
  • About the windings. ...
  • About the shaft.

Why do armatures spin?

The armature is mounted on bearings and is free to rotate. It is mounted in the magnetic field produced by permanent magnets or current passing through coils of wire, which are called the field coils. When a current passes through the armature coil, forces act on the coil and result in rotation.

motor manufacturing automatically : stator and armature production assembly line

38 related questions found

How can I make my coil spin slower?

The speed of rotation of the coil can be increased by:
  1. increasing the size of the current;
  2. using a stronger magnet;
  3. increasing the number of turns of wire in the coil;
  4. reducing friction between the coil and the axel it rotates on.

How can a motor spin fast?

One easy way to make the motor run faster is to add another magnet. Hold a magnet over the top of the motor while it is running. As you move the magnet closer to the spinning coil, one of two things will happen. Either the motor will stop, or it will run faster.

What is the purpose of armature?

In electrical engineering, an armature is the component of an electric machine which carries alternating current. The armature windings conduct AC even on DC machines, due to the commutator action (which periodically reverses current direction) or due to electronic commutation, as in brushless DC motors.

What is difference between armature and rotor?

It is located inside the stator and its objective is to rotate so that in turn the motor shaft or generator rotates. So basically, the rotor consists of a field magnet which rotates while the rotor remains stationary and on the other hand the armature carries current and is stationary and part of the stator.

Which material is used in alternator armature?

In the alternator construction of the stator, the armature winding is wound in this stationary part. It is made from an iron ring laminated by silicon steel with slots. The special magnetic material used in stator allows high magnetic permeability as well as low magnetic hysteresis.

What is armature class 10th?

Armature: It is a rectangular iron core wrapped by the copper coil through which electricity passes and due to magnetic field it experiences a force and rotates. Brushes: It conducts current between stationary wires and moving parts, most commonly in a rotating shaft.

What is armature voltage?

Armature voltage is the voltage developed at the terminals of the armature winding of an AC or a DC machine during generation of power.

What is difference between armature and field winding?

The armature is the winding to which the load is connected. In small generators, the field windings are often on the stator, and the armature windings are on the rotor. Most large machines, however, have a rotating field and a stationary armature. ... Thus, the armature is the stator and the field is the rotor.

Why are steel layers added to the loops?

In a practical motor, the armature loops are fitted inside slots of highly permeable steel layers. This will enhance magnetic flux interaction.

What are the types of armature winding?

Types of Armature Winding of Alternator
  • Single phase and poly phase armature winding.
  • Concentrated winding and distributed winding.
  • Half coiled and whole coiled winding.
  • Single layer and double layer winding.
  • Lap, wave and concentric or spiral winding and.
  • Full pitched coil winding and fractional pitched coil winding.

Why armature is stationary in alternator?

1) The current is drawn directly from fixed terminals on the stator without the use of brush contacts. 2) The insulation of stationary armature winding is easier. 3) The number of sliding contacts (slip rings) is reduced. Moreover, the sliding contacts are used for low-voltage DC Source.

What does a commutator do?

Note: In a generator, a commutator results in an output of direct current. In a motor, the commutator converts incoming alternating current into direct current before using it to generate motion.

What is the major cause for open in the armature circuit?

Bad brush tension is the major cause for open in the Armature circuit. Grooving: t leaves a smooth, slotted area on your commutators. ... It's important to address copper drag immediately because the buildup of copper in the commutator segments can lead to a short circuit of the armature windings.

Can commutator convert AC to DC?

Commutator converts the Alternating to direct current in a DC generator. The alternating current generated in the armature windings of the generator gets converted to direct current after it passes through the commutator and the brushes.

Why commutator is used in DC motor?

Commutators and brushes are used on all DC generators and DC motors. ... On DC and most AC motors the purpose of the commutator is to insure that the current flowing through the rotor windings is always in the same direction, and the proper coil on the rotor is energized in respect to the field coils.

How is a commutator made?

The commutator itself is a split ring, typically made of copper, with each segment of the ring attached to each end of the armature coil. If the armature has multiple coils, the commutator will similarly have multiple segments—one for each end of each coil.

What makes a motor more powerful?

The strength of the motor (torque) is determined by voltage and the length of the wire in an electromagnet in the stator, the longer the wire (which means more coils in the stator) the stronger the magnetic field. This means more power to turn the rotor.

How do you slow down an engine?

A couple of things you can do:
  1. Use gears to change ratio of speed, which is what you're going to do. ...
  2. Use a stepper motor, which are commonly used for high-torque, low RPM applications.
  3. Find some sort of PWM control circuit to slow it down, although you probably won't be able to get it down to 5-10RPM.